توسط bahram555 » 18 دسامبر 2005, 00:37
سلام و باز هم تشکر
متاسفانه هنوز نتونستم pearpc رو راه اندازی کنم.من انو بصورت زیر پیکربندی کردم و در prompt هم در مسیر مناسب ppccfg.exampel رو فعال کردم که خطای زیر امد و اجرا نشد!
ppccfg.exampel is not recogenized as an intenal or extenal command,operable program or batch file.
سیستم من p4 2.4 هست و 512 هم رم داره و درایو سی دی رام j: هست. mac osx 10.2 رو دارم که 3 تا سی دی هست که وقتی تو سی دی رام میذارم ویندوز انو با مدیا پلیر میخاد باز کنه و بصورت track نمایش میده! آیا سی دی ها درست هستن؟
در ضمن من فایل پیکر بندی رو بشکل زیر ویرایش کردم اگه زحمت نیست بفرمائید کجاش اشکال داره تا درستش کنم.خیلی ممنون میشم.
## PearPC Configuration File
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
ppc_start_resolution = "800x600x15@70"
##
## Set this to non-zero for turning on fullscreen mode on startup.
##
ppc_start_full_screen = 0
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws
## (and so run faster) but feel less responsive. You should adjust
## this to your computer speed and personal
## preference.
##
redraw_interval_msec = 40
##
## Key codes
##
key_compose_dialog = "F11"
key_change_cd_0 = "none"
key_toggle_mouse_grab = "F12"
key_toggle_full_screen = "Alt+Return"
##
## Loader
##
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##
prom_bootmethod = "select"
## Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
prom_env_bootargs = ""
prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302 (G3)
## Set to 0x000c0000 to enable G4 emulation
## Only change if you know want you are doing
##
cpu_pvr = 0x00088302
#cpu_pvr = 0x000c0000
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
#memory_size=0x20000000
##
## IO Devices
##
##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type
##
## Valid drive types are:
## hd: A hdd image should be specified
## e.g. "test/imgs/linux.img"
## cdrom: A cdrom image should be specified
## For Linux or BeOS a cdrom device can be specified as well
## e.g. "/dev/cdrom"
## nativecdrom: Platform dependant
## Win (SPTI): drive letter, e.g. "d:\"
## Win (ASPI): SCSI host adapter,target,lun e.g. "2,0,1"
## BeOS (ATAPI): device path, e.g. "/dev/disk/ide/atapi/0/master/0/raw"
pci_ide0_master_installed = 1
pci_ide0_master_image = "test/imgs/macosx_6gb.img"
#pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "j:\"
#pci_ide0_slave_image = "2,0,0"
pci_ide0_slave_image = "/imgs/mac.iso"
pci_ide0_slave_type = "cdrom"
##
## Network
##
## Choose one of the cards
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:35"
##
## USB
##
pci_usb_installed = 1
##
## NVRAM
##
nvram_file = "nvram"